diamondaviators.net

I wanna order some O2D2 kits for my new DA62 (not yet delivered), but I'm not sure which connector it uses.



MH says it's the 750 connector. Can anyone confirm that?

I ordered the o2d2 kit for my DA62 at Oshkosh this year. I took a picture of the oxygen port in the 62 and showed it to the Mountain High sales rep. I got the 750 connector so that must be correct. You will also need a pressure reducing regulator. I also got the boom cannula that connects to your headset. They usually offer a discount for Oshkosh and probably Sun n Fun as well.

Flyingferg wrote: ↑Fri Feb 03, 2023 11:45 pm I ordered the o2d2 kit for my DA62 at Oshkosh this year.

I don't see a 750 connector on the MH site. Is there a longer part number or name?

I talked to them over email and they mentioned the 750. I'm assuming they have it. I'll place my order over email or phone to make sure I don't get anything I don't need.

Boatguy wrote: ↑Sat Feb 04, 2023 9:20 pmI don't see a 750 connector on the MH site. Is there a longer part number or name?

Here's a link to the page with the BNC connectors, from which you can choose the 750 version.

And also a link to the Inline Reducing Regulator page, where you can choose the 750 connector as part of the bundle.

I verified with Mountain High today. If you own a Mountain High O2D2 and cannulas, this is the kit to buy to use the built in oxygen system in a DA42/62. It's the 750 connector to the O2 outlet in the plane, a first stage regulator and a little plumbing.

EDS-ILR-750