diamondaviators.net

hi does anyone know the manufacturers part number or are the rubber dampers something i have to get from diamond. i saw the manual it says i need five. is this the correct part number? 9032-23-10

There are actually 6 - the five big ones and one small one at the bottom of the assembly. I’m out of town away from my documentation, so I cannot confirm the part numbers right now. They are standard DIN components, much cheaper getting them from a supplier other than Diamond. The last time I ordered some, the six plus shipping from the UK was about the same cost as one from Diamond.

5 is correct for the DA20 A1
10 is correct for the DA20 C1
6 is correct for the DA40-180

They are all different part numbers. and the original part numbers have since been superseded. Check the latest revision of the parts catalog on the Diamond site for the current part numbers.

Oops, didn’t notice it was for a DA20...

Same advice applies - buy the DIN part.

Steve wrote: ↑Sun Dec 27, 2020 5:47 pm Oops, didn’t notice it was for a DA20...

Same advice applies - buy the DIN part.

Hi Steve how do I find the din number or supplier? I have a DA20-A1 Katana.

Thanks

Mine (DA40) are actually listed in the IPC by DIN numbers. The part number you listed actually looks like a DIN number. As I mentioned, I’m away from my office (and peripheral brain), but the first number specified the type of part, the next 2 were dimensions.

I bought mine from Berger Tools in the UK:

https://www.berger-tools.co.uk/

If you search their website looking for rubber bumpers or something like that, you will find the page.

Steve

bought last year in Germany

REIFF Technische Produkte GmbH
Werner-von-Siemens-Str. 25
78224 Singen/Hohentwiel

Tel: +49 7121 323-5016 / Fax: +49 7121 323-330
E-Mail:e-services@reiff-gruppe.de

Elastomerfeder 32 x 40 ID=13,5 Wkst.: CR ** Effbe 3240 CR ** - 1 ea price EUR 3.40

Elastomerfeder 63 x 50 ID=17,0 Wkst.: CR ** Effbe 6350 CR **** 5 ea price EUR 8.40

actually for the DA40

all sizes are here:
https://www.reiff-tpshop.de/shop/de/sch ... er-cr.html

thanks gang. i'm going to make an attempt at getting the german stuff even though i dont speak a word of german.

DA20-A1 nose gear dampers, pn DV2-9032-23-01 quantity of 5 & pn DV2-9032-23-02, quantity of 1.
You need to contact a Diamond Service Center for latest pricing.

Thomas wrote: ↑Mon Dec 28, 2020 8:27 am bought last year in Germany

REIFF Technische Produkte GmbH
Werner-von-Siemens-Str. 25
78224 Singen/Hohentwiel

Tel: +49 7121 323-5016 / Fax: +49 7121 323-330
E-Mail:e-services@reiff-gruppe.de

Elastomerfeder 32 x 40 ID=13,5 Wkst.: CR ** Effbe 3240 CR ** - 1 ea price EUR 3.40

Elastomerfeder 63 x 50 ID=17,0 Wkst.: CR ** Effbe 6350 CR **** 5 ea price EUR 8.40

actually for the DA40

all sizes are here:
https://www.reiff-tpshop.de/shop/de/sch ... er-cr.html

Thanks buddy,

Mine is the DA20 so I believe its a different size. I'll order 5 from diamond and buy extras from the manufacturer since i'll have the measurements.

big help thanks