Hi, just wondering if anyone here who removed their hartzell prop ran into a problem with comparability of the prop governor
https://hartzellprop.com/wp-content/upl ... DA40XL.pdf
The Gov. I currently have is made by Avia Propeller and has a MT prop part number P860-23
I’m still awaiting the hartzell stc documents. Oviouslky the document on their website doesn’t state this governor is compatable.
Any thoughts ?
Hartzell 2 blade composite prop / governor
Moderators: Rick, Lance Murray
- chili4way
- 5 Diamonds Member
- Posts: 523
- Joined: Fri Jun 08, 2018 10:51 pm
- First Name: Paul
- Aircraft Type: DA40NG
- Aircraft Registration: N718NG
- Airports: KADS
- Has thanked: 1060 times
- Been thanked: 482 times
Re: Hartzell 2 blade composite prop / governor
Josh, what are you trying to do? It sounds like you want to change your propeller (from what to what?) while keeping the existing MT governor. I'd be surprised if there is an operational compatibility issue (i.e. something that would cause it not to be able to regulate the set RPM). The STC documents will tell you for sure - at least what prop-governor combinations have been certified.
[Additional: See page 18 in the post below.]
You can call Hartzell technical support at 800-942-7767 (Option #3) or simply email techsupport@hartzellprop.com.
[Additional: See page 18 in the post below.]
You can call Hartzell technical support at 800-942-7767 (Option #3) or simply email techsupport@hartzellprop.com.
Last edited by chili4way on Tue Apr 06, 2021 3:38 pm, edited 1 time in total.
- Steve
- 5 Diamonds Member
- Posts: 1971
- Joined: Thu Aug 12, 2010 1:23 am
- First Name: Steve
- Aircraft Type: DA40
- Aircraft Registration: N432SC
- Airports: 1T7
- Has thanked: 85 times
- Been thanked: 503 times
Re: Hartzell 2 blade composite prop / governor
For those that have MT props, here is a list of approved governors by propeller model number:
https://www.mt-propeller.com/pdf/sbs/sb14r8.pdf
https://www.mt-propeller.com/pdf/sbs/sb14r8.pdf
- firedwg1
- 3 Diamonds Member
- Posts: 59
- Joined: Fri May 11, 2018 2:56 am
- First Name: josh
- Aircraft Type: DA40
- Aircraft Registration: DA40XLS
- Airports: KSNA
- Has thanked: 2 times
- Been thanked: 12 times
Re: Hartzell 2 blade composite prop / governor
I just got stc docs so reviewing them now
The confusing thing is when changing from MT 3 blade composite Configuration to hartzell 2 blade composite, there are two governors called out specially for hartzell. However the MT governor is not called out and is left to Interpretation.
Several in the industry have stated the two blade composite hartzell perfectly compatible with the mt Governor.
When I get the firm answer I’ll post it here.
The confusing thing is when changing from MT 3 blade composite Configuration to hartzell 2 blade composite, there are two governors called out specially for hartzell. However the MT governor is not called out and is left to Interpretation.
Several in the industry have stated the two blade composite hartzell perfectly compatible with the mt Governor.
When I get the firm answer I’ll post it here.
- firedwg1
- 3 Diamonds Member
- Posts: 59
- Joined: Fri May 11, 2018 2:56 am
- First Name: josh
- Aircraft Type: DA40
- Aircraft Registration: DA40XLS
- Airports: KSNA
- Has thanked: 2 times
- Been thanked: 12 times
Re: Hartzell 2 blade composite prop / governor
Ok so here’s the update, hartzell instructions page 3 par 4 has a catch all phrase that basically states
“All propeller governor models that are listed in the FAA type certification A47CE that have a maximum output pressure of 350psi are compatible with the propeller listed in this STC and may be used in lieu of Hartzell S-6-1 governors”.
Hopefully this is useful to someone in the future.
Reference INST_102706_revision C 4/10/08
STC SA02476CH-D
“All propeller governor models that are listed in the FAA type certification A47CE that have a maximum output pressure of 350psi are compatible with the propeller listed in this STC and may be used in lieu of Hartzell S-6-1 governors”.
Hopefully this is useful to someone in the future.
Reference INST_102706_revision C 4/10/08
STC SA02476CH-D
- perossichi
- 3 Diamonds Member
- Posts: 188
- Joined: Tue Sep 18, 2018 4:05 am
- First Name: Peter
- Aircraft Type: DA40
- Aircraft Registration: N925RH
- Airports: KVNY
- Has thanked: 31 times
- Been thanked: 75 times
Re: Hartzell 2 blade composite prop / governor
Previous owner changed to Hartzell 2 blade composite some 6 years ago. Retained original Woodward governor. No problems that I ve seen.
Sold 2002. Powerflo, Hartzell composite two blade, 530W/430, 345 transponder.