Cockpit Seal Adhesive

Any DA40 related topics

Moderators: Rick, Lance Murray

Post Reply
User avatar
Shodan01
2 Diamonds Member
2 Diamonds Member
Posts: 40
Joined: Thu Oct 01, 2020 1:03 am
First Name: Steve
Aircraft Type: DA40
Aircraft Registration: N475PS
Airports: KGMU
Has thanked: 5 times
Been thanked: 1 time

Cockpit Seal Adhesive

Post by Shodan01 »

I am curious if anyone has had the white rubber cockpit seal come loose?

I believe a passenger getting out of the back reaching up grabbing the frame has loosened the seal and I was curious if people are just using some type of silicone or similar to reattach. Its not completely off, just loose for around 6 inches.
User avatar
Soareyes
4 Diamonds Member
4 Diamonds Member
Posts: 308
Joined: Fri Feb 28, 2020 12:47 pm
First Name: Dan
Aircraft Type: DA42-VI
Aircraft Registration: N518R
Airports: KINF
Has thanked: 235 times
Been thanked: 195 times

Re: Cockpit Seal Adhesive

Post by Soareyes »

I had to replace the whole piece on my DA40. On the advice of Diamond I used clear silicone, despite admonitions that we are not supposed to use silicone on our plastic airplanes.

The tricky part is using just enough, not too much and keeping it hidden beneath the rubber seal. Watch for wispy strands of the stuff that want to drape across the nearby surfaces. Silicone is difficult to remove.
Current: DA42-V1

Previous: Hang gliders, Paraglider, DA40(x3), Cessna 150 Aerobat, SR22
Post Reply