DA40NG - NXi Phase 2 database problems
Moderators: Rick, Lance Murray
- CFIDave
- 5 Diamonds Member
- Posts: 2682
- Joined: Wed Nov 07, 2012 3:40 pm
- First Name: Dave
- Aircraft Type: OTHER
- Aircraft Registration: N333GX
- Airports: KJYO Leesburg VA
- Has thanked: 234 times
- Been thanked: 1480 times
Re: DA40NG - NXi Phase 2 database problems
Thanks so much! Looks like they're available on the German language part of the site (the files are still in English).AndrewM wrote: ↑Mon May 04, 2020 1:59 pm This is the new location of the checklists
https://www.diamondaircraft.com/de/serv ... hecklists/
Epic Aircraft E1000 GX
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
- Boatguy
- 5 Diamonds Member
- Posts: 1866
- Joined: Mon Jan 22, 2018 4:48 am
- First Name: Russ
- Aircraft Type: DA62
- Aircraft Registration: N962M
- Airports: KSTS
- Has thanked: 1366 times
- Been thanked: 1196 times
Re: DA40NG - NXi Phase 2 database problems
I just received a response from Diamond that the checklist file is placed on an SD card and placed in the lower slot of the MFD, just like any other database.
No idea why the checklist wasn't installed at the factory.
No idea why the checklist wasn't installed at the factory.
- Boatguy
- 5 Diamonds Member
- Posts: 1866
- Joined: Mon Jan 22, 2018 4:48 am
- First Name: Russ
- Aircraft Type: DA62
- Aircraft Registration: N962M
- Airports: KSTS
- Has thanked: 1366 times
- Been thanked: 1196 times
Re: DA40NG - NXi Phase 2 database problems
The file from Diamond is checklist.gcl. Garmin Support wrote and said the file needs to be renamed:
"...What is the format of the checklist file (what is the file extension, is it .ace or .gcl)? If it is one of those file extensions, it would have to be renamed to "chklist.ace" and placed on the bottom slot or supplemental data card of the MFD."
"...What is the format of the checklist file (what is the file extension, is it .ace or .gcl)? If it is one of those file extensions, it would have to be renamed to "chklist.ace" and placed on the bottom slot or supplemental data card of the MFD."
- spr
- 2 Diamonds Member
- Posts: 31
- Joined: Mon Dec 09, 2019 11:11 pm
- First Name: Stephen
- Aircraft Type: DA40NG
- Aircraft Registration: N388LA
- Airports: KSAV
- Has thanked: 89 times
- Been thanked: 17 times
Re: DA40NG - NXi Phase 2 database problems
I downloaded the .gcl file and installed it this afternoon. I just put it on an SD card and placed in the lower slot of the MFD. It installed and the error message went away. The only problem is the the file that downloads for the electronic checklist for DA40 NG G1000 NXi is for the DA42. I looked at it quickly, and noticed there were check boxes for de-icing and two engines, but when I got home I noticed I have the G1000 NXi checklist for DA42's. I tried downloading it again in case I chose the wrong file, but I got the same one.
I sent this in to Diamond, I'll let you know what they say.
I sent this in to Diamond, I'll let you know what they say.
- CFIDave
- 5 Diamonds Member
- Posts: 2682
- Joined: Wed Nov 07, 2012 3:40 pm
- First Name: Dave
- Aircraft Type: OTHER
- Aircraft Registration: N333GX
- Airports: KJYO Leesburg VA
- Has thanked: 234 times
- Been thanked: 1480 times
Re: DA40NG - NXi Phase 2 database problems
It's interesting that the new Pilot's Guide for G1000 NXi Phase II manual that was just published for the DA62 says to load the checklist file by placing it on an SDcard inserted into the *TOP* MFD slot -- it even says it might be the same MFD top slot SDcard already being used for recording flight logs.
For Legacy G1000 the checklist file must be called "checklist.ace" and has to reside on the bottom MFD card. But for NXi, perhaps the top or bottom MFD card slot can be used? And NXi seems to require a .gcl (not .ace) file suffix.
For Legacy G1000 the checklist file must be called "checklist.ace" and has to reside on the bottom MFD card. But for NXi, perhaps the top or bottom MFD card slot can be used? And NXi seems to require a .gcl (not .ace) file suffix.
Epic Aircraft E1000 GX
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
- Boatguy
- 5 Diamonds Member
- Posts: 1866
- Joined: Mon Jan 22, 2018 4:48 am
- First Name: Russ
- Aircraft Type: DA62
- Aircraft Registration: N962M
- Airports: KSTS
- Has thanked: 1366 times
- Been thanked: 1196 times
Re: DA40NG - NXi Phase 2 database problems
You didn't need to rename it per the instructions from Garmin?
- spr
- 2 Diamonds Member
- Posts: 31
- Joined: Mon Dec 09, 2019 11:11 pm
- First Name: Stephen
- Aircraft Type: DA40NG
- Aircraft Registration: N388LA
- Airports: KSAV
- Has thanked: 89 times
- Been thanked: 17 times
Re: DA40NG - NXi Phase 2 database problems
No, I just inserted it as is and loaded it, shut down then restarted.
- CFIDave
- 5 Diamonds Member
- Posts: 2682
- Joined: Wed Nov 07, 2012 3:40 pm
- First Name: Dave
- Aircraft Type: OTHER
- Aircraft Registration: N333GX
- Airports: KJYO Leesburg VA
- Has thanked: 234 times
- Been thanked: 1480 times
Re: DA40NG - NXi Phase 2 database problems
I just verified that .gcl is the new checklist format required for G1000 NXi.
If you feel like modifying an NXi electronic checklist file, here is Garmin's latest checklist editor for Windows PCs:
https://www8.garmin.com/support/downloa ... p?id=12032
If you feel like modifying an NXi electronic checklist file, here is Garmin's latest checklist editor for Windows PCs:
https://www8.garmin.com/support/downloa ... p?id=12032
Epic Aircraft E1000 GX
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
Former DA40XLS, DA42-VI, and DA62 owner
ATP, CFI, CFI-I, MEI
- spr
- 2 Diamonds Member
- Posts: 31
- Joined: Mon Dec 09, 2019 11:11 pm
- First Name: Stephen
- Aircraft Type: DA40NG
- Aircraft Registration: N388LA
- Airports: KSAV
- Has thanked: 89 times
- Been thanked: 17 times
Re: DA40NG - NXi Phase 2 database problems
I finally got this fixed. I tried installing the DA40NG_Nxi.gcl file that now downloads from the Diamond checklist site but it would not install. Diamond sent me another file titled checklist.gcl (I think it is the same file but retitled). This installed through the bottom slot on the MFD and replaced the DA42 checklist.