EGT Fluctuations

Any DA40 related topics

Moderators: Rick, Lance Murray

Post Reply
User avatar
mdieter
3 Diamonds Member
3 Diamonds Member
Posts: 132
Joined: Wed Jul 17, 2013 7:03 pm
First Name: Mark
Aircraft Type: DA40
Aircraft Registration: N43LM
Airports: KROC
Has thanked: 54 times
Been thanked: 31 times

EGT Fluctuations

Post by mdieter »

DA40, G1000. Noticed that the #4 EGT bounces around. At ambient, it's about 30 degrees less than the others, but sometimes in flight it showed 870 degrees less than it's brothers. I'd like to try swapping it with another cylinder. Will I need a gasket or some other part to do the swap? I'd hate to mess up and ground the plane. :oops: Any advice appreciated.
Mark
N43LM
DA40.1047
User avatar
Steve
5 Diamonds Member
5 Diamonds Member
Posts: 1973
Joined: Thu Aug 12, 2010 1:23 am
First Name: Steve
Aircraft Type: DA40
Aircraft Registration: N432SC
Airports: 1T7
Has thanked: 85 times
Been thanked: 503 times

Re: EGT Fluctuations

Post by Steve »

Mark: there are no gaskets on the EGT probes. They self-seal in a small hole in the exhaust riser. Just be careful handling them as they are fragile.
User avatar
Lou
4 Diamonds Member
4 Diamonds Member
Posts: 370
Joined: Sat Nov 21, 2015 1:39 pm
First Name: Louis
Aircraft Type: DA40
Aircraft Registration: CGXLO
Airports: CZVL
Has thanked: 118 times
Been thanked: 115 times

Re: EGT Fluctuations

Post by Lou »

That's what mine looked like after it failed. I replaced it and all is back to normal.
Post Reply