I do and it helps but I still find the oil oressure in particular to be too high. I use Aeroshell 15W50 now as it is ubiquitous in Canada. I might switch to something thinner this winter.thefoxx wrote:Move to Arizona then there would be no summer flying - too hot!Pascal wrote:Another option would be to move to Arizona. But I am not ready to retire just yet.YCCA wrote:My CHT and oil temp is exactly the same. I’m buying the winterization kit now
Pascal, do you have the winter kit?
DA 20 owner/fan love flying it.. stories
Moderators: Rick, Lance Murray
- Pascal
- 3 Diamonds Member
- Posts: 165
- Joined: Sun May 15, 2016 3:35 am
- First Name: Pascal
- Aircraft Type: DA20-C1
- Aircraft Registration: CGSMT
- Airports: CYJN
- Has thanked: 40 times
- Been thanked: 33 times
Re: DA 20 owner/fan love flying it.. stories
- thefoxx
- 3 Diamonds Member
- Posts: 94
- Joined: Mon Feb 10, 2014 2:24 am
- First Name: Arthur
- Aircraft Type: DA20-C1
- Aircraft Registration: GIIM
- Airports: CYKA
- Has thanked: 97 times
- Been thanked: 24 times
Re: DA 20 owner/fan love flying it.. stories
No - I meant the baffles that block the airflow through the cowl air inlets, and the outlet at the bottom.RMarkSampson wrote:How did we get from the love of flying a DA-20 to frigid winters in the NE?!?
I had the electric engine heater piece of it - not any baffles. The plug was mounted next to the oil cap for easy access to plug in. My A&P removed it when we rewired the engine for the EDM-900. It might be in the corner of the hanagar or I might have chunked it - can’t remember. The wires looked like they had done some heavy duty heating from the previous owner’s Nebraska winters. In Florida, I think I plugged it in once just to see if it worked and didn’t pop a circuit breaker.
I recommend getting that Tanis back hooked up (that is what is in there, isn;t it?) - you will not regret it
You definitely will need to get the baffles though - without it, you are going to have some pretty low oil temps - at least that was my experience! Expensive from Diamond, but they are quick and easy to install and remove a required.
- RMarkSampson
- 4 Diamonds Member
- Posts: 237
- Joined: Fri Sep 05, 2014 1:24 am
- First Name: Mark
- Aircraft Type: DA20-C1
- Aircraft Registration: N966CT
- Airports: KPCM
- Has thanked: 20 times
- Been thanked: 45 times
Re: DA 20 owner/fan love flying it.. stories
My oil temp comes up fairly quickly from ambient to 110’ish by the time I am ready to takeoff - then 175’ish with normal operations. I don’t consider that low. The occasional time I fly north I don’t remember it being an issue even with using the heater to warm up the cockpit.
I’ll guess keep that Tanis around but quite frankly I don’t see me putting it back on as I won’t be moving north where it becomes necessary.
I’ll guess keep that Tanis around but quite frankly I don’t see me putting it back on as I won’t be moving north where it becomes necessary.