This is the one I have currently, note the iPad mini can set under the panel reflection cover perfectly without interfering the flight control. iPad mini is better than the iPad Pro 10 inch I had before. Also, I noticed that the mount I had on the flight deck vibrates a lot during the flight. It’s ...

I got a 6 in the first week it was out. I just now received a notification from RAM of imminent release of a compatible cradle, similar to the ones provides for a large array of iPads. These cradles work the best for me. I will still use my pro 11 as primary, as it provides bigger target areas for ...

Greetings! This hangar does have a little slop, so tail drag won't work out very well :lol: Cheers! Bryan, that is exactly the same setup I have been using for several years now - two lines extended well out from the hangar where the mains need to go. Your hangar looks almost identical to mine (exce...

e3QycCm4KZE https://www.diamondaircraft.com/en/flight-school-solution/electric-aircraft/ Summary: 90 minute flight time, 205Wh/kg energy density, 20 minute recharge time. Test flights in 2022, certification 2023. Unclear if quoted times are achievable at launch. Sounds like they feel confident enou...

Hope this works


Sent from my iPhone using Tapatalk

I found that trying to modify either of the older EZ roller cradles to suit the -6 to be impractical. The squared-off edges are a problem, as well as the positioning of the roller and its arm. At least for now the X-mount is the way to go. BTW “My Pilot Store” had by far the best price for this mou...

I was at the avionics shop today and finally had the 1” RAM head mounted on the left lower panel following one of the schemes mentioned earlier. Then I used the two part RAM connector to hold the iPad mount. Result is better than the storm window mount. I can open the storm window to get some fresh ...

MarkA wrote:We used hinged 2 X 4 screwed into the floor with painted guides on the ramp to guide the DA40 in and out of a 40' hangar. Never had a hangar rash issue.

Like the idea !!!


Sent from my iPhone using Tapatalk

I use a tug to get in and out - gives me enough control - have about 8-10 inch clearance on each side. I also have an aiming line on the back wall of the hangar I made using black and white gorilla tape. So if I aim the top of the vertical fin at that line it really helps. That’s a smart thinking. ...

Bryan, I agree which route to take with such a intermittent issue is painful. I was trying to get my aircraft back on the line as quickly as I could and I also took your route to replace the GMU44, which ultimately did not solve the issue for me. I now have (what I think) a perfectly good GMU44 sit...