Search found 52 matches
- Sat Dec 30, 2023 6:11 pm
- Forum: DA40 Forum
- Topic: SureFly Failure
- Replies: 1
- Views: 465
SureFly Failure
I installed a SureFly in December, 2019, and had approximately 750 hours tach time on the unit. No timing advance was used and other than the well known mag time lag causing a backfire, no significant problems were noted. When the update for this problem was released, I was told that my unit would n...
- Sun Aug 27, 2023 3:03 am
- Forum: DA40 Forum
- Topic: No plans for Diamond GFC 500 autopilot?
- Replies: 48
- Views: 6467
Re: No plans for Diamond GFC 500 autopilot?
Like Rich, I have no complaints about the KAP140 in modes other than on an approach. As the lateral sensitivity increases (especially after the faf), the lateral oscillation can become excessive with majority of approaches requiring hand flying or input using the CWS. Is there any solution to this b...
- Wed May 24, 2023 4:16 pm
- Forum: DA40 Forum
- Topic: Flap mass balance corrosion
- Replies: 16
- Views: 4625
Re: Flap mass balance corrosion
For anyone interested, the part number for the flap arm balance is DA4-5751-00-62MOD. I also could not find the part in the IPC or in the maintenance manual. Brittany at Premier Aircraft at KFXE had the part in stock and also confirmed its elusive nature in the Diamond publications. Apparently they ...
- Mon Apr 17, 2023 11:47 am
- Forum: DA40 Forum
- Topic: IRAN Right Magneto or Install SureFly?
- Replies: 24
- Views: 5838
Re: IRAN Right Magneto or Install SureFly?
I installed an early version of the SureFly in Nov. 2019 for the left mag, disconnecting the SlickStart. I did not utilize the timing advance feature. The starts are easy and the SureFly has performed as advertised. I was fortunate in having none of the problems mentioned in the earlier threads. I w...
- Mon Sep 26, 2022 2:11 am
- Forum: DA40 Forum
- Topic: Air intake vent tape
- Replies: 30
- Views: 2996
Re: Air intake vent tape
Thanks for the compliment. Unfortunately after making several plugs for two different years of the DA-40 plus my own plane, I have found that the vents are all slightly different. This requires that the vent plug be fashioned to each plane in order to make it good looking as well as a tight fit. Qui...
- Mon Sep 19, 2022 2:49 am
- Forum: DA40 Forum
- Topic: Air intake vent tape
- Replies: 30
- Views: 2996
Re: Air intake vent tape
Sorry for the error, but I meant taping the bottom vent worked the best.
- Mon Sep 19, 2022 2:40 am
- Forum: DA40 Forum
- Topic: Air intake vent tape
- Replies: 30
- Views: 2996
Re: Air intake vent tape
B9B77DDD-8619-4B6B-A5D9-3C37BFEDEE11.png On my plane, I tried taping the bottom then top vent as a comparison. Taping the bottom vent gave me the best ventilation and noise reduction. As noted in previous posts, the sailplane tape would wrinkle, and with time eventually come off the vent. My soluti...
- Thu Aug 25, 2022 2:34 am
- Forum: Diamond Gadgets & Extras
- Topic: Oxygen Concentrator
- Replies: 60
- Views: 38411
Re: Oxygen Concentrator
[album] 67C623A9-7C3A-4E5C-A13A-C18068B278DE.jpeg 67C623A9-7C3A-4E5C-A13A-C18068B278DE.jpeg [/album] I have used the Imogen Aviator concentrator for over 2 years. It works as advertised. Whether there is a single pilot or a copilot determines where the concentrator is hung. Behind the pilot seat is...
- Fri Jul 22, 2022 11:18 am
- Forum: DA40 Forum
- Topic: Desser Retreads
- Replies: 2
- Views: 424
Re: Desser Retreads
I have used Desser retreads for the last 10 years without problems.
The wear is good, slightly less than the Flight Specials, but certainly worth the difference in cost.
No problem with the fairings.
The wear is good, slightly less than the Flight Specials, but certainly worth the difference in cost.
No problem with the fairings.
- Mon Jul 04, 2022 12:04 pm
- Forum: DA40 Forum
- Topic: MLG alignment shims
- Replies: 2
- Views: 370
Re: MLG alignment shims
Bill
Check your PM concerning wheel shims
TomO
Check your PM concerning wheel shims
TomO